SDSL Moderate block error rate
...................................................................................................................................................................................................................................
Alarm identifier
SDSLcDEG
Information The quality of the incoming SHDSL signal is degraded.
Alarm category Transmission
ASAP
Alarm severity
(default setting)
Deferred
Reporting state
(default setting)
Reported
Local indications –
Cause In the incoming SHDSL signal, the number of CRC errors per second exceeds
a predefined error threshold.
Actions Check SHDSL connection on attenuation and crosstalk.
Note(s) These bit error thresholds are defined:
• More than 37 CRC errors per second lead to an SDSLcDEG alarm.
• More than 163 CRC errors per second lead to an SDSLcEXC alarm.
Alarm messages
...................................................................................................................................................................................................................................
365-312-803R7.2
Issue 4, May 2007
Alcatel-Lucent - Proprietary
See notice on first page
1-129
To Next Page
Loading...
