EasyManua.ls Logo

Alcatel-Lucent 1643 AMS - VC-3 Payload mismatch

Alcatel-Lucent 1643 AMS
386 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
VC-3 Payload mismatch
...................................................................................................................................................................................................................................
Alarm identifier VC3cPLM
Information The received payload value, used to indicate the composition of the VC-3
payload, does not match the expected value.
Alarm category Transmission
ASAP sdhLOPath
Alarm severity
(default setting)
Prompt
Reporting state
(default setting)
Reported
Local indications In the reporting Network Element:
The red fault LED is lit.
In the downstream direction the alarm indication signal is inserted.
In the upstream direction VC-3 Remote Defect Indicator (RDI) is inserted.
Cause Payload composition of VC-3 at the network element that reported the alarm is
not the same as the payload composition of VC-3 at its far-end station.
Actions If the received payload is >=1, check if the mapping mode of the local and
far-end network elements is the same.
Alarm messages
...................................................................................................................................................................................................................................
365-312-803R7.2
Issue 4, May 2007
Alcatel-Lucent - Proprietary
See notice on first page
1-267

Table of Contents

Other manuals for Alcatel-Lucent 1643 AMS

Related product manuals