Alcatel-Lucent 1643 AMS - IS-IS configuration error

IS-IS configuration error
...................................................................................................................................................................................................................................
Alarm identifier DCNcCONF
Information IS-IS configuration error.
Alarm category Processing error
ASAP dcn
Alarm severity
(default setting)
Prompt
Reporting state
(default setting)
Reported
Local indications The red fault LED is lit.
Cause IS-IS is not set on this network element.
Actions Provision the correct IS-IS parameters.
Alarm messages
...................................................................................................................................................................................................................................
1-60
Alcatel-Lucent - Proprietary
See notice on first page
365-312-803R7.2
Issue 4, May 2007