3-5 Field Strength Spectrum Analyzer Measurements
3-16 PN: 10580-00447 Rev. H Spectrum Analyzer MG
Example User Antenna Data
To create a list of custom antenna factors, use the following steps:
1. Export the existing USER ANTENNAS csv file by pressing the EXPORT button in the FIELD
STRENGTH menu.
2. From the FILES menu, move the exported file to a USB memory device and then to a computer for
editing.
3. If this is the first time exporting the file, read the instructions at the top of the file, then delete those
rows:
**
This is an EXAMPLE. Make sure to REPLACE and DELETE all existing content in
this file, including these instructions.
Accepted criteria:
Each Antenna name must be unique, contain alpha-numeric characters only, and
must be on a single line
Frequency must be in MHz
Factors must be in dB
Please use the following examples as a guide:
**
4. Name each custom antenna and add cal factors below, per the instructions in the header:
Antenna_Example1
1920 35.886
1930 35.931
1940 35.976
1950 36.021
1960 36.065
1970 36.109
1980 36.153
Antenna_Example2
2110 36.706
2120 36.747
2130 36.788
2140 36.828
2150 36.869
2160 36.909
2170 36.949
5. Save the file to a USB memory device and insert it into the instrument.
6. Select the IMPORT button in the FIELD STRENGTH menu and select the new file from the USB drive.
7. Select USER ANTENNAS… button to view the list of imported antennas.
To Next Page
Loading...
