MS2090A UG PN: 10580-00444 Rev. U 1-1
Chapter 1 — General Information
1-1 Introduction
The MS2090A Field Master Pro User Guide is a part of the set of manuals that cover all of the instrument
functions and their use. This manual covers the instrument overview, system functions, and other common
features. Remote programming is covered in the programming manual. Additionally, the MS2090A
Field Master Pro offers a remote PC software that replicates the instrument’s user interface onto your
PC/laptop screen. This allows the user to connect with the instrument via Ethernet connection. The remote PC
software facilitates the ability to recall data and perform on-screen measurement analysis without the need to
physically access the instrument (refer to Appendix C, “PC Software”).
Before You Begin
• Read the Field Master Pro MS2090A Information, Compliance, and Safety Guide (PN: 10100-00069) for
important safety, legal, and regulatory notices before operating the equipment.
• Charge the instrument battery using the supplied battery charger until fully charged.
Note The instrument may reboot when the battery charge level is low and external power is removed.
To Next Page
Loading...
Need help?
General
