Anritsu ML2480B Series User Manual

ML248xA / ML249xA Common Procedures
5-50 13000-00162
September 2005
Positioning the Delta Marker
Two methods are available to position the delta marker.
Method 1
1. Press the Channel hard key followed by the Markers soft key to display the [Markers]
group of commands.
2. Press the Delta Marker soft key to display the [Delta Mkr] group of commands.
3. Press the Delta Marker soft key to enable the display of the delta marker. When the
delta marker is visible the green LED on the Delta Marker soft key is lit.
4. Press the Position Delta Mkr….soft key to display the [Position Delta Marker] dialog.
5. Enter a value using the Inc and Dec soft keys, or from the keypad in the normal
manner.
Method 2
1. Press the Channel hard key followed by the Markers soft key to display the [Markers]
group of commands.
2. Press the Delta Marker soft key to display the [Delta Mkr] group of commands.
3. Press the Delta Marker soft key to enable the display of the delta marker. When the
delta marker is visible the green LED on the Delta Marker soft key is lit.
4. Check that a green LED is visible on the Keys Move Delta Mk soft key and then use
the right and left arrow on the keypad to position the delta marker as required.
Note: The active marker is displayed automatically when the delta marker is enabled.

Anritsu ML2480B Series Specifications

General

Brand	Anritsu
Model	ML2480B Series
Category	Measuring Instruments
Language	English