ML248xA / ML249xA Common Procedures
5-88 13000-00162
September 2005
Recalling Instrument Settings
Any of the instrument settings that were saved in the manner described on the previous
page can be recalled for use at any time.
1. Press the System hard key followed by the Save/Recall soft key.
2. Press Recall Settings to display the [Recall Settings] dialog. The dialog displays a
list of the twenty setting stores, a name if one has been specified, and an indication
of whether the store is currently in use. Press Page Down soft key as required to
display stores 11 to 20.
3. Use the soft key arrows or arrows on the keypad to select any of the available stores
and then press Recall to revert the unit to the saved configuration.
Note: On the ML249xA settings can also be recalled from the Preset menu.
To Next Page
Loading...
Need help?
General
