Anritsu MS9740B - Using Wavelength and Level Markers

Chapter 3 Measurement
3-20
3.7.2 Using Wavelength and Level Markers
To display the makers reading wavelength and level:
1. Press
Marker Select
.
2. Select the marker with
f1
through
f6
.
f1 λMkr_A
: wavelength marker A
f2 λMkr_B
: wavelength marker B
f3 LMkr_C
: level marker C
f4 LMkr_D
: level marker D
f5 TMkr
: trace marker
f6 ΔMkr
: delta marker
3. Turn the rotary knob to move the marker.
4. The marker wavelength and level is displayed in the marker display
field.
5. Press
Marker Select
and select
f7 Erase
to delete the marker.
Note:
f5 TMkr
and
f6 ΔMkr
can be used when the active trace is displayed.
The marker is not displayed when the power monitor is displayed.
Instead of
λMkr
,
fMkr
is displayed at the frequency display.
To display the marker at the peak level position:
Press
Peak Search
.
The trace marker is displayed at the peak level position.