Anritsu MS9740B - Power Connection; Power Requirements

Chapter 2 Before Use
2-8
2.3 Power Connection
This section describes the procedures for supplying power.
For your safety, read the following operating procedures before turning on
the MS9740B.
2.3.1 Power Requirements
For normal operation of the MS9740B, use the power voltage range
described below.
Power source Voltage range Frequency
100 Vac system
100 to 120 V
50 to 60 Hz
200 Vac system
200 to 240 V
50 to 60 Hz
Switching between 100 and 200 V systems is automatic.
CAUTION
Supplying power exceeding the above range may result in
electrical shock, fire, failure, or malfunction.