3.8 Saving and Reading Data
3-25
3
3.8.2 Saving Screens
Pressing
Copy
saves the screen display to a file.
The file extension, name and save destination folder can be set at the
described in Section 6.1.1 “Setting Interfaces and File
Operating Environment”.
When a USB flash drive is connected, you can specify it as a save
destination. Refer to 6.2 “Managing Files” for details.
The procedure is the same as described in Section 3.8.1 “Saving
Measurement Conditions and Waveform Data” where automatic or
manual input of the file name can be selected. When automatic is set, the
file name has the following structure:
Copy + date + "_" + consecutive-number.bmp
Example: Copy20190410_000.bmp
To Next Page
Loading...
