2.3 Power Connection
2-9
2
2.3.2 Connecting Power Cord
Insert the power plug into an outlet, and connect the other end to the
power inlet on the rear panel. To ensure that the instrument is earthed,
always use the supplied 3-pin power cord, and insert the plug into an
outlet with an earth terminal.
WARNING
Always connect the instrument to a properly grounded
outlet. Do not use the instrument with an extension cord or
transformer that does not have a ground wire.
If the instrument is connected to an ungrounded outlet,
there is a risk of receiving a fatal electric shock. In addition,
the peripheral devices connected to the instrument may be
damaged.
CAUTION
If an emergency arises causing the instrument to fail or
malfunction, disconnect the instrument from the power
supply by disconnecting either end of the power cord.
When installing the instrument, arrange the power inlet and outlet so
that an operator may easily connect or disconnect the power cord.
If the instrument is mounted in a rack, a power switch for the rack or a
circuit breaker may be used for power disconnection.
To Next Page
Loading...
