Anritsu MS9740B - Setting Control Panel; Displaying Windows Desktop

2.9 Setting Control Panel
2-21
2
Before Use
2.9 Setting Control Panel
The MS9740B is set to the factory defaults for optimal measurement.
Changing the Windows settings is outside the scope of operation warranty.
In addition, the performance may drop or functions may not operate
correctly if the Windows settings are changed. Read the general notes in
this section carefully when changes to the Windows settings are required.
CAUTION
MS9740B is guaranteed to operate properly only with
factory defaults.
Proper operation is not guaranteed if there are any
changes to Windows settings, or if a program not
guaranteed by Anritsu is installed.
Any changes to the registry can cause MS9740B to behave
abnormally.
2.9.1 Displaying Windows Desktop
Connect a mouse and a keyboard to operate Windows. Use the accessory
USB mouse and a compatible USB keyboard.
Display the Windows Desktop as described below. To display applications
of the MS9740B again, press the application switch or select an
application in the Windows Taskbar.
Mouse
Click the Minimize button at the top right corner of the application
window of the MS9740B. Minimizing all applications displays the
Desktop.
Keyboard
Press the Windows key and
D
key to minimize all windows and display
the Windows Desktop.