7.6 Cautions on Storage MS9740B for Extended Period
7-15
7
Performance Test and Maintenance
7.6 Cautions on Storage MS9740B for Extended Period
Wipe off dust, fingerprint marks, stains, spots, etc. from the surface of the
MS9740B before storing it.
Fit the protective front cover before storage. Put the power cord, CD-ROM
and other accessories in the accessory box and store it with the main
frame.
Avoid storing the MS9740B in these places:
●
Places that are exposed to direct sunlight
●
Dusty places
●
Damp places where condensation may occur on the MS9740B surface
●
Places where the MS9740B may be corroded by active gases
●
Places where the MS9740B may be oxidized
●
Places where the MS9740B may be exposed to strong vibration and
shock
●
Places where the MS9740B might topple over.
●
Places with temperatures and relative humidity in the following
ranges:
Temperature: lower than −20°C or higher than 60°C
Humidity: 90% or more
Recommended storage conditions
It is recommended that the MS9740B be stored in a place that meets the
ambient conditions suggested above, plus the following conditions, if it is
not to be used for a long period of time:
●
Temperature: 5 to 45°C
●
Humidity: 40 to 80%
●
Little temperature and humidity fluctuations within one day
To Next Page
Loading...
