Anritsu MS9740B - Turning Power On;Off; Power-On

Chapter 2 Before Use
2-18
2.8 Turning Power On/Off
2.8.1 Power-on
1. Connect the power cord plug, referring to 2.3 “Power Connection”.
The MS9740B enters the standby state and the power switch lamp
lights orange.
2. Press the power switch.
The power lamp lights green and the Windows start-up begins.
3. After 1 minute has passed, the MS9740B start-up screen is
displayed.
Notes:
● Do not press the power switch while the start-up screen is
displayed, otherwise the MS9740B software may not start
normally.
The time required for startup may be longer at low
temperatures.
● After powering off the MS9740B, wait for at least 2 seconds
before powering on again. Otherwise, the MS9740B may not
boot normally.