4.5 Analyzing Waveform
4-13
4
Changing Measurement Conditions
4.5 Analyzing Waveform
The spectrum waveform center wavelength, half width, side mode
suppression ratio and spectrum integrated power can be analyzed.
This function is executed at the Active Trace. In addition, when the zone
markers are displayed, data between the zone markers is searched. The
target of analysis is data displayed on the screen. Changing Span may
sometimes mean some data is not displayed and this non-displayed data
cannot be analyzed.
Press
F5 Analysis
key to use this function.
To Next Page
Loading...
