Anritsu MS9740B - Managing Files

6.2 Managing Files
6-9
6
Setting Operating Environment
6.2 Managing Files
The following operations can be performed on measurement result files
and system data files.
● Copy
● Move
● Delete
● Setting and releasing write protection
To display file operation screen, press
F8
and display Config on the
horizontal function keys. And then, press
F6
and
f7 File Operation
,
respectively.
To operate file
1. Select the drive to operate the file.
(a) Press
f1 Device
to display the dialog box.
(b) Select the drive in the dialog box using arrow keys, and press
f7
Set
.
2. Select the file type to be operated.
(a) Press
f3 Image
to select the image file.
(b) Press
f4 XML
to select the XML file.
(c) Press
f5 CSV
to select the CSV file.
(d) Press
f7 System Info
to select the system information file.
The message is displayed when the file does not exist in the drive.
3. Select the file.
(a) If the file name is displayed in the dialog box, move the cursor to
the file with the arrow keys.
(b) Press
Enter
to check the check box.
To select or release all displayed files, press
f3 Select All
.
4. Select the operation for the file.
(a) Press
f4 File Protect
to protect writing the file.
A message is displayed to confirm the file save change. Select
Change with the arrow keys and press the
Enter
key to change
the file protect settings
(b) To move a file on drive D, press
f5 Move to USB
.
A message is displayed to confirm the file move and destination
devise name.
Select
Move with the arrow keys and press the
Enter
key to
move the file to the moved devise destination.