Chapter 4 Changing Measurement Conditions
4-26
Setting Relative or Absolute Value Display
The Active Trace level display can be set to relative or absolute level.
When relative level is set, the spectrum peak level is displayed as 100% or
0 dBm and the units are either % or dB.
1. Press
f6 Graph
.
2. Select the display method from
f1
and
f2.
Normal: The vertical axis units are either W or dBm.
Normalize: The vertical axis units are either % or dBm.
Erasing Overlap Display
Erase Overlap Traces on the screen.
1. Press
f7 Erase Overlap
.
To Next Page
Loading...
