Appendix E Video Band Width and Sweep Time
E-2.
Note:
Even if VBW is set at 1 kHz Fast or 200 Hz Fast, when one of the
following conditions is met, the sweep speed is the same as when
VBW is set at 1 kHz or 200 Hz:
●
Point Average is set to On.
●
Dynamic Range is set to High.
●
The external trigger (Ext. Trigger) is set to On.
●
The settings are other than the above, but the wavelength per
point is less than 4 pm.
To Next Page
Loading...
