AudioCodes Mediant 500L - Quality of Service Parameters

Version 7.2 1023 Mediant 500L Gateway & E-SBC
User's Manual 69. Configuration Parameters Reference
Parameter Description
For a description of the parameter, see ''Configuring Static IP Routes''
on page 152.
69.2.4 Quality of Service Parameters
The Quality of Service (QoS) parameters are described in the table below.
Table 69-12: QoS Parameters
Parameter Description
Layer-2 Class Of Service (CoS) Parameters (VLAN Tag Priority Field)
DiffServ Table
configure network > qos vlan-
mapping
[DiffServToVlanPriority]
The table configures DiffServ-to-VLAN Priority mapping. For each
packet sent to the LAN, the VLAN Priority of the packet is set
according to the DiffServ value in the IP header of the packet.
The format of this ini file is as follows:
[ DiffServToVlanPriority ]
FORMAT DiffServToVlanPriority_Index =
DiffServToVlanPriority_DiffServ,
DiffServToVlanPriority_VlanPriority;
[ \DiffServToVlanPriority ]
For example:
DiffServToVlanPriority 0 = 46, 6;
DiffServToVlanPriority 1 = 40, 6;
DiffServToVlanPriority 2 = 26, 4;
DiffServToVlanPriority 3 = 10, 2;
For more information, see Configuring Quality of Service on page
163.
Note: For the parameter to take effect, a device reset is required.
Layer-3 Class of Service (TOS/DiffServ) Parameters
CLI path: configure network > qos application-mapping
Media Premium QoS
media-qos
[PremiumServiceClassMediaDif
fServ]
Global parameter defining the DiffServ value for Premium Media
CoS content.
You can also configure this functionality per specific calls, using IP
Profiles (IpProfile_IPDiffServ) or Tel Profiles
(TelProfile_IPDiffServ). For a detailed description of the parameter
and To configure the functionality, see ''Configuring IP Profiles'' on
page 438 or Configuring Tel Profiles on page 471.
Note: If the functionality is configured for a specific profile, the
settings of this global parameter is ignored for calls associated with
the profile.
Control Premium QoS
control-qos
[PremiumServiceClassControlDi
ffServ]
Global parameter defining the DiffServ value for Premium Control
CoS content (Call Control applications).
You can also configure the functionality per specific calls, using IP
Profiles (IpProfile_SigIPDiffServ) or Tel Profiles
(TelProfile_SigIPDiffServ). For a detailed description of the
parameter and To configure the functionality in the IP Profiles table,
see ''Configuring IP Profiles'' on page 438 or Configuring Tel
Profiles on page 471.