EasyManua.ls Logo

AudioCodes Mediant 500L - Replacing the Corporate Logo; Replacing the Corporate Logo with an Image

AudioCodes Mediant 500L
1260 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Version 7.2 67 Mediant 500L Gateway & E-SBC
User's Manual 6. Web-Based Management
6.2.1 Replacing the Corporate Logo
You can replace the default corporate logo image (i.e., AudioCodes logo) that is displayed
in the Web interface. The logo appears in the following Web areas:
Web Login screen:
Figure 6-20: Corporate Logo on Web Login Screen
Menu bar:
Figure 6-21: Corporate Logo on Menu Bar
You can replace the logo with one of the following:
A different image (see Replacing the Corporate Logo with an Image on page 67)
Text (see Replacing the Corporate Logo with Text on page 68)
6.2.1.1 Replacing the Corporate Logo with an Image
You can replace the logo with a different image. The following figure displays an example
where the default logo (top) is replaced with a different image (bottom):
Figure 6-22: Customizing Web Logo Image
To customize the logo:
1. Save your new logo image file in a folder on the same PC that you are using to access
the device's Web interface.
2. In your browser's URL address field, append the case-sensitive suffix "/AdminPage" to

Table of Contents

Other manuals for AudioCodes Mediant 500L

Related product manuals