Version 7.2 71 Mediant 500L Gateway & E-SBC
User's Manual 6. Web-Based Management
6.2.4 Creating a Login Welcome Message
You can create a personalized welcome message that is displayed on the Web Login
screen. The message always begins with the title "Note" and has a color background, as
shown in the example below:
Figure 6-28: Creating Login Welcome Message
To create a login welcome message:
1. Create an ini file that includes the WelcomeMessage table parameter. Use the
parameter to configure your message, where each index row is a line in your
message, for example:
[WelcomeMessage ]
FORMAT WelcomeMessage_Index = WelcomeMessage_Text;
WelcomeMessage 1 = "*********************************";
WelcomeMessage 2 = "** This is a Welcome message! **";
WelcomeMessage 3 = "*********************************";
[\WelcomeMessage]
2. Load the ini file using the Auxiliary Files page (see Loading Auxiliary Files on page
791).
3. Reset the device with a save-to-flash for your settings to take effect.
To remove the welcome message:
1. Load an empty ini file, using the Auxiliary Files page.
2. Reset the device with a save-to-flash for your settings to take effect.
To Next Page
Loading...
