Version 7.2 793 Mediant 500L Gateway & E-SBC
User's Manual 45. Auxiliary Files
45.1.2 Loading Auxiliary Files through CLI
You can load Auxiliary files from remote servers through CLI:
Single Auxiliary file:
# copy <file> from <URL of remote server>
For example:
# copy call_progress_tones from
http://192.169.11.11:80/cpt_us.dat
Multiple (batch) Auxiliary files: The Auxiliary files must be contained in a TAR (Tape
ARchive) file (.tar). The TAR file can contain any number and type of Auxiliary files
(e.g., Dial Plan file and CPT file).
# copy aux-package from | to <URL of remote server with TAR
file name>
For example:
# copy aux-package from http://192.169.11.11:80/aux_files.tar
For more information on CLI, refer to the CLI Reference Guide.
45.2 Deleting Auxiliary Files
You can delete loaded Auxiliary files through the Web interface, as described below.
To delete a loaded Auxiliary file:
1. Open the Device Information page (see ''Viewing Device Information'' on page 869);
the loaded files are listed under the Loaded Files group:
Figure 45-1: List of Loaded Auxiliary Files
2. Click the Delete button corresponding to the file that you want deleted; a confirmation
message box appears.
3. Click OK to confirm.
4. Reset the device with a save-to-flash for your settings to take effect.
45.3 Call Progress Tones File
The Call Progress Tones (CPT) and Distinctive Ringing (analog interfaces only) Auxiliary
file contains definitions of the CPT (levels and frequencies) that are detected and
generated by the device.
The CPT for analog interfaces is comprised of two sections:
The first section contains the definitions of the Call Progress Tones (levels and
frequencies) that are detected/generated by the device.
The second section contains the characteristics of the Distinctive Ringing signals that
are generated by the device (see Distinctive Ringing on page
796).
You can use one of the supplied Auxiliary files (.dat file format) or create your own file. To
create your own file, it's recommended to modify the supplied usa_tone.ini file (in any
To Next Page
Loading...
