AudioCodes Mediant 500L - Accessing Configuration Pages from Navigation Tree

User's Manual 52 Document #: LTRT-10532
Mediant 500L Gateway & E-SBC
Item # Description
License Key file (see ''Installing License Key through Web Interface'' on page
822).

Software Upgrade: Starts the Software Upgrade Wizard for upgrading the
device's software (see ''Software Upgrade'' on page 787).

Configuration Wizard: Opens the SBC Configuration Wizard, which is used for
quick-and-easy configuration of the device (see SBC Configuration Wizard on
page 851).
4
Alarm bell icon, which displays the number of active alarms generated by the device.
The color of the number of alarms display indicates the highest severity of an active
alarm. If you click the icon, the Active Alarms table is displayed. For more information on
the table, see Viewing Active Alarms.
5
Button displaying the username of the currently logged in user. If you click the button,
information of the logged-in user is displayed (see ''Viewing Logged-In User Information''
on page 79) and the Log Out button is provided to log out the Web session (see
''Logging Off the Web Interface'' on page 66).
6
Tab bar containing tabs pertaining to the selected menu:
 Setup menu:

IP Network

Signaling & Media

Administration
 Monitor menu: Monitor
 Troubleshoot menu: Troubleshoot
7
Back and Forward buttons that enable quick-and-easy navigation through previously
opened pages. This is especially useful when you find that you need to return to a
previously accessed page, and then need to go back to the page you just left.
 Back button: Goes back to the previously accessed page.
 Forward button: Opens the page that you initially left using the back button. The
button is available only if you have used the Back button.
8
Navigation pane, which displays the Navigation tree containing the commands (items)
for opening the configuration pages (see ''Navigation Tree'' on page 52).
9
SRD filter. When your configuration includes multiple SRDs, you can filter tables in the
Web interface by a specific SRD. For more information, see ''Filtering Tables in Web
Interface by SRD'' on page 351.
10
Search box for searching parameter names and values (see ''Searching for
Configuration Parameters'' on page 64).
11
Work pane where configuration pages are displayed.
6.1.4 Accessing Configuration Pages from Navigation Tree
Accessing configuration pages is a three-fold process that consists of selecting a menu on
the menu bar, a tab on the tab bar, and then a page item in the Navigation pane. The
Navigation pane provides the Navigation tree, which is a tree-like structure of folders and
page items that open configuration pages in the Work pane. The hierarchical structure and
organization of the items in the Navigation tree allow you to easily drill-down and locate the
required item.
The Navigation tree consists of the following areas:
 Home : (Callout #1) First ("home") page displayed when a menu-tab combination is
initially selected. For example, the home page of the Setup menu - Administration