Version 7.2 1201 Mediant 500L Gateway & E-SBC
User's Manual 69. Configuration Parameters Reference
Parameter Description
[PulseDialGenerationMakeTime] Defines the duration of the Make connection (on-hook) for
FXO pulse dial generation.
The valid value range is 20 to 120 (in msec). The default is 40.
Note: For the parameter to take effect, a device reset is
required.
[PulseDialGenerationInterDigitTime] Defines the inter-digit duration (time between consecutively
dialed digits) for FXO pulse dial generation.
The valid value range is 300 to 1500 (in msec). The default is
700.
Note: For the parameter to take effect, a device reset is
required.
69.10.12 Trunk Groups and Routing Parameters
The routing parameters are described in the table below.
Table 69-66: Routing Parameters
Parameter Description
Trunk Group Table
Trunk Group Table
configure voip > gateway trunk-
group
[TrunkGroup]
Defines and activates Trunk Groups.
The format of the ini file table parameter is as follows:
[TrunkGroup]
FORMAT TrunkGroup_Index = TrunkGroup_TrunkGroupNum,
TrunkGroup_FirstTrunkId, TrunkGroup_FirstBChannel,
TrunkGroup_LastBChannel, TrunkGroup_FirstPhoneNumber,
TrunkGroup_ProfileName, TrunkGroup_LastTrunkId,
TrunkGroup_Module;
[\TrunkGroup]
For more information, seeConfiguring Trunk Groups on page
501.
Note: Trunk Group ID 1 is denoted as 0 in the table.
Trunk Group Settings Table
Trunk Group Settings
configure voip > gateway trunk-
group-setting
[TrunkGroupSettings]
Defines the rules for channel allocation per Trunk Group.
The format of the ini file table parameter is as follows:
[TrunkGroupSettings]
FORMAT TrunkGroupSettings_Index =
TrunkGroupSettings_TrunkGroupId,
TrunkGroupSettings_ChannelSelectMode,
TrunkGroupSettings_RegistrationMode,
TrunkGroupSettings_GatewayName,
TrunkGroupSettings_ContactUser,
TrunkGroupSettings_ServingIPGroupName,
TrunkGroupSettings_MWIInterrogationType,
TrunkGroupSettings_TrunkGroupName,
TrunkGroupSettings_UsedByRoutingServer;
[\TrunkGroupSettings]