AudioCodes Mediant 500L - Supplementary Services

Version 7.2 1239 Mediant 500L Gateway & E-SBC
User's Manual 69. Configuration Parameters Reference
Parameter Description
For more information, see ''Configuring SBC Routing Policy
Rules'' on page 705.
Dial Plan Table
Dial Plan
configure voip > sbc dial-
plan
[DialPlan]
Defines the name of the Dial Plan.
The format of the ini file table parameter is as follows:
[ DialPlan ]
FORMAT DialPlan_Index = DialPlan_Name;
[ \DialPlan ]
For more information, see ''Configuring Dial Plans'' on page
726.
Dial Plan Rule Table
Dial Plan Rule
configure voip > sbc dial-
plan-rule
[DialPlanRule]
Defines the dial plan rules per Dial Plan.
For more information, see ''Configuring Dial Plans'' on page
726.
Note:
 The table is hidden in the ini file.
 To configure Dial Plan rules from a file, see ''Importing and
Exporting Dial Plans'' on page 731.
Malicious Signature Table
Malicious Signature
configure voip > sbc
malicious-signature-
database
[MaliciousSignatureDB]
Defines the malicious signature patterns
The format of the ini file table parameter is as follows:
[ MaliciousSignatureDB ]
FORMAT MaliciousSignatureDB_Index =
MaliciousSignatureDB_Name, MaliciousSignatureDB_Pattern;
[ \MaliciousSignatureDB ]
For more information, see ''Configuring Malicious Signatures''
on page 743.
69.11.1 Supplementary Services
The SBC and CRP supplementary services parameters are described in the table below.
Table 69-71: SBC and CRP Supplementary Services Parameters
Parameter Description
Emergency Call Preemption Parameters
For more information on SBC emergency call preemption, ''Configuring Call Preemption for SBC
Emergency Calls'' on page 745.
SBC Preemption Mode
configure voip > sbc settings >
sbc-preemption-mode
[SBCPreemptionMode]
Enables SBC emergency call preemption.
 [0] Disable (default)
 [1] Enable
Emergency Message Condition
configure voip > sbc settings >
sbc-emerg-condition
Defines the index of the Message Condition rule in the Message
Conditions table that is used to identify emergency calls.
Note: The device applies the rule only after call classification