Version 7.2 51 Mediant 500L Gateway & E-SBC
User's Manual 6. Web-Based Management
6.1.3 Areas of the GUI
The areas of the Web interface's GUI are shown in the figure below and described in the
subsequent table.
Figure 6-2: Main Areas of the Web Interface GUI
Table 6-1: Description of the Web GUI Areas
Item # Description
1
Company logo.
2
Menu bar containing the menus.
3
Toolbar providing frequently required command buttons.
Save: Saves configuration changes to the device's flash memory (without resetting
the device). If you make a configuration change, the button is surrounded by a red-
colored border as a reminder to save your settings to flash memory, by clicking the
button.
Reset: Opens the Maintenance Actions page, which is used for performing various
maintenance procedures such as resetting the device (see ''Basic Maintenance'' on
page 779). If you make a configuration change that takes effect only after a device
reset, the button is surrounded by a red-colored border as a reminder to save your
settings to flash memory with a device reset; otherwise, your changes revert to
previous settings if the device subsequently resets or powers off.
Actions:
Configuration File: Opens the Configuration File page, which is used for saving
the ini file to a folder on your PC, or for loading an ini file to the device (see
''Configuration File'' on page
827).
Auxiliary Files: Opens the Auxiliary Files page, which is used for loading
Auxiliary files to the device (see ''Loading Auxiliary Files through Web Interface''
on page
792).
License Key: Opens the License Key page, which is used for installing a new
To Next Page
Loading...
