User's Manual 66 Document #: LTRT-10532
Mediant 500L Gateway & E-SBC
3. Click the link of the navigation path corresponding to the required found parameter to
open the page on which the parameter appears.
6.1.8 Getting Help
The Web interface provides you with context-sensitive pop-up help of standalone
parameters. When you hover your mouse over a parameter's field, a pop-up appears with a
short description of the parameter, as shown in the following example:
Figure 6-18: Viewing Context-Sensitive Help for a Parameter
6.1.9 Logging Off the Web Interface
The following procedure describes how to log off the Web interface.
To log off the Web interface:
1. On the menu bar, from the 'Admin' drop-down list, click Log Out; the following
confirmation message box appears:
Figure 6-19: Log Out Confirmation Box
2. Click Yes; you are logged off the Web session and the Web Login window appears
enabling you to re-login, if required.
6.2 Customizing the Web Interface
You can customize the following elements of the device's Web interface (GUI):
Corporate logo (see Replacing the Corporate Logo on page 67)
Device's (product) name (see Customizing the Product Name on page 69)
Favicon (see Customizing the Favicon on page 69)
Login welcome message (see Creating a Login Welcome Message on page 66)
Note:
• The product name also affects other management interfaces.
• In addition to Web-interface customization, you can customize the following to
reference your company instead of AudioCodes:
√ SNMP Interface: Product system OID (see the SNMPSysOid parameter) and
trap Enterprise OID (see the SNMPTrapEnterpriseOid parameter).
√ SIP Messages: User-Agent header (see the UserAgentDisplayInfo parameter),
SDP "o" line (see the SIPSDPSessionOwner parameter), and Subject header
(see the SIPSubject parameter).
To Next Page
Loading...
