AudioCodes Mediant 500L - Call Setup Rule Examples

User's Manual 410 Document #: LTRT-10532
Mediant 500L Gateway & E-SBC
Parameter Description
action-subject
[CallSetupRules_ActionSubject]
tag) upon which you want to perform the action if the condition,
configured in the 'Condition' parameter (see above) is met.
The valid value is a string of up to 100 characters (case-
insensitive).
Examples:
 header.from contains '1234'
 param.call.dst.user (called number)
 param.call.src.user (calling number)
 param.call.src.name (calling name)
 param.call.redirect (redirect number)
 param.call.src.host (source host)
 param.call.dst.host (destination host)
 srctags (source tag)
 dsttags (destination tag)
Action Type
action-type
[CallSetupRules_ActionType]
Defines the type of action to perform.
 [0] Add (default) = Adds new message header, parameter
or body elements.
 [1] Remove = Removes message header, parameter, or
body elements.
 [2] Modify = Sets element to the new value (all element
types).
 [3] Add Prefix = Adds value at the beginning of the string
(string element only).
 [4] Add Suffix = Adds value at the end of the string (string
element only).
 [5] Remove Suffix = Removes value from the end of the
string (string element only).
 [6] Remove Prefix = Removes value from the beginning of
the string (string element only).
 [20] Run Rules Set = Performs a different Rule Set ID,
specified in the 'Action Value' parameter (below)
 [21] Exit = Stops the Rule Set ID and returns a result
("True" or "False"). .
Action Value
action-value
[CallSetupRules_ActionValue]
Defines a value that you want to use in the action.
The valid value is a string of up to 300 characters (case-
insensitive).
Examples:
 '+9723976'+ldap.attr.alternateNumber
 '9764000'
 srctags
 enum.result.url
 ldap.attr.displayName
 true (if the 'Action Type' is set to Exit)
 false (if the 'Action Type' is set to
Exit
)
18.3.1 Call Setup Rule Examples
Below are configuration examples for using Call Setup Rules.
 Example 1: This example configures the device to replace (manipulate) the incoming