AudioCodes Mediant 500L - Configuring Management User Accounts

Version 7.2 73 Mediant 500L Gateway & E-SBC
User's Manual 6. Web-Based Management
Parameter Description
erfaces_Index]
Interface Name
interface-name
[AdditionalManagementInt
erfaces_InterfaceName]
Assigns an IP network interface (from the IP Interfaces table) to the
management interface.
For more information on IP network interfaces, see Configuring IP
Network Interfaces on page 145.
Note:
 Only Control- and/or Media-type IP network interfaces can be
associated with additional management interfaces.
 An IP network interface can be associated with only one additional
management interface.
TLS Context Name
tls-context-name
[AdditionalManagementInt
erfaces_TLSContextName]
Assigns a TLS Context (from the TLS Contexts table) to the
management interface. A TLS Context provides secure TLS-based
management access.
For more information on TLS Contexts, see Configuring TLS
Certificate Contexts on page 113.
HTTPS Only
https-only-val
[AdditionalManagementInt
erfaces_HTTPSOnly]
Defines the protocol required for accessing the management
interface.
 [0] HTTP and HTTPS = The management interface can be
accessed over a secured (HTTPS) and an unsecured (HTTP)
connection.
 [1] HTTPS Only = The management interface can be accessed
only over a secured (HTTPS) connection.
 [2] Use global definition = The type of management connection
(HTTP and HTTPS, or HTTPS Only) depends on the configuration
of the global parameter, HTTPSOnly (see Configuring Secured
(HTTPS) Web on page 82).
6.4 Configuring Management User Accounts
The Local Users table lets you configure up to 10 management user accounts for the
device's Web interface and CLI. You configure each user account with login credentials
(username and password) and with a management user level which defines the level of
read and write privileges. The table below describes the different types of user levels:
Table 6-5: Description of Management User Levels
User Level
Numeric
Representation in
RADIUS
Privileges
Security
Administrator
200 Read/write privileges for all Web pages. This user level
can create all other user levels and is the only one that
can create the first Master user.
Note: At least one Security Administrator user must exist.
Master
220
Read/write privileges for all Web pages. This user level
can create all user levels, including additional Master
users and Security Administrators. It can delete all users