User's Manual 756 Document #: LTRT-10532
Mediant 500L Gateway & E-SBC
♦ Proxy Name: Secondary
♦ SBC IPv4 SIP Interface: Interface-2
♦ Proxy Address: 200.10.10.2
11. In the IP Groups table, configure the following IP Groups:
• Index 0:
♦ Type: Server
♦ Name: Primary-Proxy
♦ Proxy Set: Primary
♦ Classify By Proxy Set: Enable
• Index 1:
♦ Type: Server
♦ Name: Sec-Proxy
♦ Proxy Set: Secondary
♦ Classify By Proxy Set: Enable
• Index 2:
♦ Type: User
♦ Name: IP-Phone-A
• Index 3:
♦ Type: User
♦ Name: IP-Phone-B
12. In the Classification table, configure rules to classify calls from the IP Phones based
on SIP Interface:
• Index 0:
♦ Source SIP Interface: Interface-1
♦ Source IP Group: IP-Phone-A
• Index 1:
♦ Source SIP Interface: Interface-2
♦ Source IP Group: IP-Phone-B
13. In the IP-to-IP Routing table, configure the routing rules:
• Index 0:
♦ Source IP Group: IP-Phone-A
♦ Destination IP Group: Primary-Proxy
• Index 1:
♦ Source IP Group: Primary-Proxy
♦ Destination IP Group:IP-Phone-A
• Index 2:
♦ Source IP Group: IP-Phone-B
♦ Destination IP Group: Sec-Proxy
• Index 3:
♦ Source IP Group: Sec-Proxy
♦ Destination IP Group: IP-Phone-B
39.7 Call Forking
This section describes various Call Forking features supported by the device.
To Next Page
Loading...
