Version 7.2 907 Mediant 500L Gateway & E-SBC
User's Manual 58. Viewing Network Status
58 Viewing Network Status
This section describes how to view network-related status.
58.1 Viewing Active IP Interfaces
You can view the device's active IP interfaces that are configured in the IP Interfaces table
(see ''Configuring IP Network Interfaces'' on page 145).
To view active IP network interfaces:
Open the IP Interface Status page (Monitor menu > Monitor tab > Network Status
folder > IP Interface Status).
58.2 Viewing Ethernet Device Status
You can view the status of configured Ethernet Devices that have been successfully
applied. To configure Ethernet Devices, see ''Configuring Underlying Ethernet Devices'' on
page 142.
To view Ethernet Device status:
Open the Ethernet Device Status page (Monitor menu > Monitor tab > Network
Status folder > Ethernet Device Status).
58.3 Viewing Ethernet Port Information
You can view status information of the device's Ethernet ports. To configure Ethernet ports,
see ''Configuring Underlying Ethernet Devices'' on page 142
To view Ethernet port information:
Open the Ethernet Port Information table, by doing one of the following:
• Navigation tree: Monitor menu > Monitor tab > Network Status folder >
Ethernet Port Information.
• Monitor home page: Click an Ethernet port on the graphical display of the device
(see ''Viewing Device Status on Monitor Page'' on page 870).
To Next Page
Loading...
