User's Manual 888 Document #: LTRT-10532
Mediant 500L Gateway & E-SBC
To reset the counters:
Click Reset Counters.
55.3 Viewing Average Call Duration
You can view the number of currently active calls and the average call duration (ACD) in
the Web interface's Average Call Duration page. You can filter display by a specific SRD or
IP Group. The page displays the following two graphs:
Upper graph: Displays the number of currently active calls (INVITEs). The x-axis
indicates the time (hh:mm:ss) and the y-axis the number of calls.
Lower graph: Displays the ACD. The x-axis indicates the time (hh:mm:ss) and the y-
axis the average call duration. The ACD is refreshed every 15 minutes and therefore,
this value reflects the average duration of all established calls made within a 15
minute period.
Note: The Average Call Duration page is applicable only to SBC calls.
To view number of active calls and average call duration:
1. Open the Average Call Duration page (Monitor menu > Monitor tab > Performance
Monitoring folder > Average Call Duration).
Figure 55-3: Viewing Average Call Duration
2. From the 'SRD / IP Group' drop-down list, select the configuration entity (SRD or IP
Group).
3. From the 'Index' drop-down list, select the specific SRD or IP Group index.
To Next Page
Loading...
