AudioCodes Mediant 500L - Page 1238

User's Manual 1238 Document #: LTRT-10532
Mediant 500L Gateway & E-SBC
Parameter Description
IPInboundManipulation_DestUsernamePrefix,
IPInboundManipulation_DestHost,
IPInboundManipulation_RequestType,
IPInboundManipulation_RemoveFromLeft,
IPInboundManipulation_RemoveFromRight,
IPInboundManipulation_LeaveFromRight,
IPInboundManipulation_Prefix2Add,
IPInboundManipulation_Suffix2Add;
[\IPInboundManipulation]
For more information, see ''Configuring IP-to-IP Inbound
Manipulations'' on page 715.
Outbound Manipulations Table
Outbound Manipulations
configure voip > sbc manipulation
ip-outbound-manipulation
[IPOutboundManipulation]
Defines outbound manipulation rules.
The format of the ini file table parameter is as follows:
[IPOutboundManipulation]
FORMAT IPOutboundManipulation_Index =
IPOutboundManipulation_ManipulationName,
IPOutboundManipulation_RoutingPolicyName,
IPOutboundManipulation_IsAdditionalManipulation,
IPOutboundManipulation_SrcIPGroupName,
IPOutboundManipulation_DestIPGroupName,
IPOutboundManipulation_SrcUsernamePrefix,
IPOutboundManipulation_SrcHost,
IPOutboundManipulation_DestUsernamePrefix,
IPOutboundManipulation_DestHost,
IPOutboundManipulation_CallingNamePrefix,
IPOutboundManipulation_MessageConditionName,
IPOutboundManipulation_RequestType,
IPOutboundManipulation_ReRouteIPGroupName,
IPOutboundManipulation_Trigger,
IPOutboundManipulation_ManipulatedURI,
IPOutboundManipulation_RemoveFromLeft,
IPOutboundManipulation_RemoveFromRight,
IPOutboundManipulation_LeaveFromRight,
IPOutboundManipulation_Prefix2Add,
IPOutboundManipulation_Suffix2Add,
IPOutboundManipulation_PrivacyRestrictionMode,
IPOutboundManipulation_DestTags,
IPOutboundManipulation_SrcTags;
[\IPOutboundManipulation]
For more information, see ''Configuring IP-to-IP Outbound
Manipulations'' on page 719.
Routing Policies Table
Routing Policies
configure voip > sbc routing sbc-
routing-policy
[SBCRoutingPolicy]
Defines Routing Policies.
The format of the ini file table parameter is as follows:
[SBCRoutingPolicy]
FORMAT SBCRoutingPolicy_Index =
SBCRoutingPolicy_Name, SBCRoutingPolicy_LCREnable,
SBCRoutingPolicy_LCRAverageCallLength,
SBCRoutingPolicy_LCRDefaultCost,
SBCRoutingPolicy_LdapServerGroupName;
[\SBCRoutingPolicy]