AudioCodes Mediant 500L - Page 1037

Version 7.2 1037 Mediant 500L Gateway & E-SBC
User's Manual 69. Configuration Parameters Reference
Parameter Description
IP
configure troubleshoot >
logging settings > dbg-rec-
dest-ip
[DebugRecordingDestIP]
Debug Recording Destination
Port
configure troubleshoot >
logging settings > dbg-rec-
dest-port
[DebugRecordingDestPort]
Defines the UDP port of the server for capturing debug recording.
The default is 925.
Enable Core Dump
[EnableCoreDump]
Enables the automatic generation of a Core Dump file upon a device
crash.
 [0] Disable (default)
 [1] Enable
Note: For the parameter to take effect, a device reset is required.
Core Dump Destination IP
[CoreDumpDestIP]
Defines the IP address of the remote server where you want the
device to send the Core Dump file.
By default, no IP address is defined.
Call Flow Report Mode
qoe call-flow-report
[CallFlowReportMode]
Enables the device to send SIP call messages to OVOC so that
OVOC can display SIP call dialog sessions as SIP call flow
diagrams.
 [0] Disable (Default)
 [1] Enable
For more information, see Enabling SIP Call Flow Diagrams in
OVOC on page 975.
Logging Filters Table
Logging Filters Table
configure troubleshoot >
logging logging-filters
[LoggingFilters]
The table defines log filtering rules for Syslog messages and debug
recordings.
The format of the ini file table parameter is:
[ LoggingFilters ]
FORMAT LoggingFilters_Index = LoggingFilters_FilterType,
LoggingFilters_Value, LoggingFilters_LogDestination,
LoggingFilters_CaptureType, LoggingFilters_Mode;
[ \LoggingFilters ]
For more information, see ''Configuring Log Filter Rules'' on page
953.
Gateway CDR Format Table
Gateway CDR Format
configure troubleshoot > cdr >
cdr-format gw-cdr-format
[GWCDRFormat]
The table defines CDR customization rules for Gateway calls.
The format of the ini file table parameter is:
[ GWCDRFormat ]
FORMAT GWCDRFormat_Index = GWCDRFormat_CDRType,
GWCDRFormat_FieldType, GWCDRFormat_Title,
GWCDRFormat_RadiusType, GWCDRFormat_RadiusID;
[ \GWCDRFormat ]
For more information, see Customizing CDRs for Gateway Calls on