AudioCodes Mediant 500L - Page 1065

Version 7.2 1065 Mediant 500L Gateway & E-SBC
User's Manual 69. Configuration Parameters Reference
Table 69-31: SIP Network Application Parameters
Parameter Description
SRDs Table
SRDs
configure voip > srd
[SRD]
Defines Signaling Routing Domains (SRD).
The format of the ini file table parameter is as follows:
[ SRD ]
FORMAT SRD_Index = SRD_Name, SRD_IntraSRDMediaAnchoring,
SRD_BlockUnRegUsers, SRD_MaxNumOfRegUsers,
SRD_EnableUnAuthenticatedRegistrations, SRD_SharingPolicy,
SRD_UsedByRoutingServer, SRD_SBCOperationMode,
SRD_SBCRoutingPolicyName;
[ \SRD ]
For more information, see ''Configuring SRDs'' on page 345.
SIP Interfaces Table
SIP Interfaces
configure voip > sip-
interface
[SIPInterface]
Defines SIP Interfaces.
The format of the ini file table parameter is as follows:
[ SIPInterface ]
FORMAT SIPInterface_Index = SIPInterface_InterfaceName,
SIPInterface_NetworkInterface, SIPInterface_ApplicationType,
SIPInterface_UDPPort, SIPInterface_TCPPort, SIPInterface_TLSPort,
SIPInterface_AdditionalUDPPorts, SIPInterface_SRDName,
SIPInterface_MessagePolicyName, SIPInterface_TLSContext,
SIPInterface_TLSMutualAuthentication,
SIPInterface_TCPKeepaliveEnable,
SIPInterface_ClassificationFailureResponseType,
SIPInterface_PreClassificationManSet,
SIPInterface_EncapsulatingProtocol, SIPInterface_MediaRealm,
SIPInterface_SBCDirectMedia, SIPInterface_BlockUnRegUsers,
SIPInterface_MaxNumOfRegUsers,
SIPInterface_EnableUnAuthenticatedRegistrations,
SIPInterface_UsedByRoutingServer, SIPInterface_TopologyLocation,
SIPInterface_PreParsingManSetName;
[ \SIPInterface ]
For more information, see ''Configuring SIP Interfaces'' on page 355.
configure voip > sip-
definition settings > tcp-
keepalive-time
[TCPKeepAliveTime]
Defines the interval (in sec) between the last data packet sent and the
first keep-alive probe to send.
The valid value is 10 to 65,000. The default is 60.
Note:
 Simple ACKs such as keepalives are not considered data packets.
 TCP keepalive is enabled per SIP Interface in the SIP Interfaces
table.
configure voip >
sip-definition
settings > tcp-
keepalive-interval
[TCPKeepAliveInterval]
Defines the interval (in sec) between consecutive keep-alive probes,
regardless of what the connection has exchanged in the meantime.
The valid value is 10 to 65,000. The default is 10.
Note: TCP keepalive is enabled per SIP Interface in the SIP Interfaces
table.
configure voip >
sip-definition
settings > tcp-
Defines the number of unacknowledged keep-alive probes to send
before considering the connection down.