AudioCodes Mediant 500L - Page 1110

User's Manual 1110 Document #: LTRT-10532
Mediant 500L Gateway & E-SBC
Parameter Description

[1] = (Default) Relay
 [2] = Bypass
 [3] = Transparent with Events
Note: To configure V34FaxTransportType to 1
(i.e., fax relay), you also need to configure
FaxTransportMode to 1 (fax relay).
V.21 Modem Transport Type
configure voip > media fax-modem > V21-
modem-transport-type
[V21ModemTransportType]
Determines the V.21 modem transport type.
 [0] Disable = (Default) Transparent.
 [2] Enable Bypass
 [3] Events Only = Transparent with Events.
Note: You can also configure this functionality
per specific calls, using IP Profiles
(IpProfile_VxxTransportType). For more
information, see ''Configuring IP Profiles''
on page
438.
V.22 Modem Transport Type
configure voip > media fax-modem > V22-
modem-transport-type
[V22ModemTransportType]
Determines the V.22 modem transport type.
 [0] Disable = Transparent.
 [2] Enable Bypass (default)
 [3] Events Only = Transparent with Events.
Note: You can also configure this functionality
per specific calls, using IP Profiles
(IpProfile_VxxTransportType). For more
information, see ''Configuring IP Profiles''
on page
438.
V.23 Modem Transport Type
configure voip > media fax-modem > V23-
modem-transport-type
[V23ModemTransportType]
Determines the V.23 modem transport type.
 [0] Disable = Transparent.
 [2] Enable Bypass (default)
 [3] Events Only = Transparent with Events.
Note: You can also configure this functionality
per specific calls, using IP Profiles
(IpProfile_VxxTransportType). For more
information, see ''Configuring IP Profiles''
on page
438.
V.32 Modem Transport Type
configure voip > media fax-modem > V32-
modem-transport-type
[V32ModemTransportType]
Determines the V.32 modem transport type.
 [0] Disable = Transparent.
 [2] Enable Bypass (default)
 [3] Events Only = Transparent with Events.
Note:
 The parameter applies only to V.32 and
V.32bis modems.
 You can also configure this functionality per
specific calls, using IP Profiles
(IpProfile_VxxTransportType). For more
information, see ''Configuring IP Profiles'' on
page 438.
V.34 Modem Transport Type
configure voip > media fax-modem > V34-
modem-transport-type
Determines the V.90/V.34 modem transport type.
 [0] Disable = Transparent.

[2]
Enable Bypass (default)