AudioCodes Mediant 500L - Page 1219

Version 7.2 1219 Mediant 500L Gateway & E-SBC
User's Manual 69. Configuration Parameters Reference
Parameter Description
configure voip > gateway
routing settings > src-
manipulation
[SourceManipulationMode]
manipulation:
 [0] = (Default) The SIP From and P-Asserted-Identity headers
contain the source number after manipulation.
 [1] = Only SIP From header contains the source number after
manipulation, while the P-Asserted-Identity header contains the
source number before manipulation.
Calling Name Manipulations IP-to-Tel Table
configure voip > gateway
manipulation calling-name-map-
ip2tel
[CallingNameMapIp2Tel]
Configures rules for manipulating the calling name (caller ID) in the
received SIP message for IP-to-Tel calls. This can include
modifying or removing the calling name. The format of this table ini
file parameter is as follows:
[ CallingNameMapIp2Tel ]
FORMAT CallingNameMapIp2Tel_Index =
CallingNameMapIp2Tel_ManipulationName,
CallingNameMapIp2Tel_DestinationPrefix,
CallingNameMapIp2Tel_SourcePrefix,
CallingNameMapIp2Tel_CallingNamePrefix,
CallingNameMapIp2Tel_SourceAddress,
CallingNameMapIp2Tel_RemoveFromLeft,
CallingNameMapIp2Tel_RemoveFromRight,
CallingNameMapIp2Tel_LeaveFromRight,
CallingNameMapIp2Tel_Prefix2Add,
CallingNameMapIp2Tel_Suffix2Add;
[ \CallingNameMapIp2Tel ]
For more information, see ''Configuring SIP Calling Name
Manipulation'' on page 544.
Calling Name Manipulations Tel-to-IP Table
configure voip > gateway
manipulation calling-name-map-
tel2ip
[CallingNameMapTel2Ip]
Defines rules for manipulating the calling name (caller ID) for Tel-
to-IP calls. This can include modifying or removing the calling
name.
[ CallingNameMapTel2Ip ]
FORMAT CallingNameMapTel2Ip_Index =
CallingNameMapTel2Ip_ManipulationName,
CallingNameMapTel2Ip_DestinationPrefix,
CallingNameMapTel2Ip_SourcePrefix,
CallingNameMapTel2Ip_CallingNamePrefix,
CallingNameMapTel2Ip_SrcTrunkGroupID,
CallingNameMapTel2Ip_RemoveFromLeft,
CallingNameMapTel2Ip_RemoveFromRight,
CallingNameMapTel2Ip_LeaveFromRight,
CallingNameMapTel2Ip_Prefix2Add,
CallingNameMapTel2Ip_Suffix2Add;
[ \CallingNameMapTel2Ip ]
For more information, see ''Configuring SIP Calling Name
Manipulation'' on page 544.
Destination Phone Number Manipulation for IP-to-Tel Calls Table
Destination Phone Number
Manipulation for IP-to-Tel Calls
configure voip > gateway
manipulation
This table parameter manipulates the destination number of IP-to-
Tel calls. The format of the ini file table parameter is as follows:
[NumberMapIp2Tel]
FORMAT NumberMapIp2Tel_Index =