AudioCodes Mediant 500L - Page 1250

User's Manual 1250 Document #: LTRT-10532
Mediant 500L Gateway & E-SBC
Parameter Description
configuration
[LdapConfiguration]
The format of the ini file table parameter is as follows:
[ LdapConfiguration ]
FORMAT LdapConfiguration_Index =
LdapConfiguration_Group,
LdapConfiguration_LdapConfServerIp,
LdapConfiguration_LdapConfServerPort,
LdapConfiguration_LdapConfServerMaxRespondTime,
LdapConfiguration_LdapConfServerDomainName,
LdapConfiguration_LdapConfPassword,
LdapConfiguration_LdapConfBindDn,
LdapConfiguration_Interface,
LdapConfiguration_MngmAuthAtt,
LdapConfiguration_useTLS,
LdapConfiguration_ConnectionStatus;
[ \LdapConfiguration ]
For more information, see ''Configuring LDAP Servers'' on
page 252.
LDAP Server Search Base DN Table
LDAP Server Search Base DN Table
configure system > ldap ldap-servers-
search-dns
[LdapServersSearchDNs]
Defines the full base path (i.e., distinguished name / DN) to
the objects in the AD where the query is done, per LDAP
server.
The format of the ini file table parameter is as follows:
[ LdapServersSearchDNs ]
FORMAT LdapServersSearchDNs_Index =
LdapServersSearchDNs_Base_Path,
LdapServersSearchDNs_LdapConfigurationIndex,
LdapServersSearchDNs_SearchDnInternalIndex;
[ \LdapServersSearchDNs ]
For more information, see ''Configuring LDAP DNs (Base
Paths) per LDAP Server'' on page 256.
Management LDAP Groups Table
Management LDAP Groups Table
configure system > ldap mgmt-ldap-
groups
[MgmntLDAPGroups]
Defines the users group attribute in the AD and
corresponding management access level.
The format of the ini file table parameter is as follows:
[ MgmntLDAPGroups ]
FORMAT MgmntLDAPGroups_Index =
MgmntLDAPGroups_LdapConfigurationIndex,
MgmntLDAPGroups_GroupIndex,
MgmntLDAPGroups_Level, MgmntLDAPGroups_Group;
[ \MgmntLDAPGroups ]
For more information, see ''Configuring Access Level per
Management Groups Attributes'' on page 258.
LDAP Server Groups Table
LDAP Server Groups Table
configure system > ldap ldap-server-
groups
[LDAPServerGroups]
Defines LDAP Server Groups.
The format of the ini file table parameter is as follows:
[ LdapServerGroups ]
FORMAT LdapServerGroups_Index =
LdapServerGroups_Name, LdapServerGroups_ServerType,
LdapServerGroups_SearchMethod,
LdapServerGroups_CacheEntryTimeout,