AudioCodes Mediant 500L - Page 26

User's Manual 26 Document #: LTRT-10532
Mediant 500L Gateway & E-SBC
LTRT Description
IPProfile_LocalHeldTone
10532
 Updated with patch Version 7.20A.156.009
 Updated sections: Configuring Management User Accounts; Device Located behind NAT;
Configuring a Static NAT IP Address for All Interfaces (removed); Silence Suppression
(removed); Comfort Noise Generation; Configuring RTP Base UDP Port (note removed);
SIP-based Media Recording (URL of France reg.; note on SRS redundancy); Configuring
SIP Recording Rules (note re timestamp); Centralized Third-Party Routing Server (call
preemption); Configuring the OVOC Server (note re report mode); Configuring Call Setup
Rules (ENUM); Call Setup Rule Examples (e.g., 5); Pre-empting Existing Calls for E911
IP-to-Tel Calls; Interworking SIP Early Media (figure); Locking and Unlocking the Device;
Prerecorded Tones File; Automatic Configuration Methods; DHCP-based Provisioning
(note re resets); Viewing Device Status on Monitor Page (analog status); Viewing Active
Alarms
 New sections: Configuring Additional Management Interfaces; Using Conditions for
Starting a SIPRec Session; Using the Proprietary SIP X-AC-Action Header; Handling
Registered AORs with Same Contact URIs; Configuring Dual Registration; Provisioning
the Device using DHCP Option 160; Enabling SIP Call Flow Diagrams in OVOC
 Updated parameters: WebUsers_Password (note); WebUsers_SessionLimit;
WebUsers_SessionTimeout; InterfaceTable_ApplicationTypes;
CpMediaRealm_PortRangeStart (note removed); SRD_SBCOperationMode (option 2
removed); SRD_BlockUnRegUsers (option 2 updated); SIPInterface_UDPPort (note
removed); SIPInterface_BlockUnRegUsers; IPGroup_SBCOperationMode (2 removed);
IPGroup_SIPConnect; ProxySet_SuccessDetectionRetries (range);
ProxySet_SuccessDetectionInterval (range); Account_RegistrarSearchMode (note);
CallSetupRules_QueryType (option 3); CallSetupRules_QueryTarget;
CallSetupRules_AttributesToQuery; CallSetupRules_Condition;
IpProfile_SBCSDPPtimeAnswer; IpProfile_SBCPreferredPTime;
IpProfile_SBCRemoteRepresentationMode (0 updated);
IpProfile_SBCRemoteReferBehavior (option 5); IPProfile_SBCRemoteHoldFormat (option
6); DialPlanRule_Tag; SBCCDRFormat_Title; LoggingFilters_LogDestination (new option
3); LoggingFilters_CaptureType (new option 6); WebSessionTimeout (range); StaticNatIP
(removed); EnableSilenceDisconnect / FarEndDisconnectSilencePeriod /
FarEndDisconnectSilenceMethod/FarEndDisconnectSilenceThreshold/BrokenConnection
DuringSilence; UseDisplayNameAsSourceNumber; SBCDBRoutingSearchMode;
SBCKeepContactUserinRegister; IpProfile_SCE (removed);
EnableWebAccessFromAllInterfaces; FaxBypassPayloadType (range);
BriTEIAssignTrigger; BriTEIRemoveTrigger
 New parameters: WebUsers_CliSessionLimit; SIPRecRouting_ConditionName;
IPGroup_UserUDPPortAssignment; NoAlarmForDisabledPort; CallFlowReportMode;
DhcpOption160Support; SIPRecTimeStamp; SIPInterface_AdditionalUDPPorts;
IPGroup_UserUDPPortAssignment; IPProfile_SBCSupportMultipleDTMFMethods;
AdditionalManagementInterfaces; DefaultTerminalWindowHeight;
ActiveAlarmTableMaxSize; SBCRemoveSIPSFromNonSecuredTransport
 Miscellaneous: EMS/SEM replaced with One Voice Operations Center (OVOC) – text and
screenshots; silence suppression removed.
Documentation Feedback
AudioCodes continually strives to produce high quality documentation. If you have any
comments (suggestions or errors) regarding this document, please fill out the
Documentation Feedback form on our Web site at
http://online.audiocodes.com/doc-
feedback.