Version 7.2 439 Mediant 500L Gateway & E-SBC
User's Manual 20. Coders and Profiles
Many of the parameters in the IP Profiles table have a corresponding "global" parameter.
For calls that are not associated with any IP Profile, the settings of the "global" parameters
are applied.
Note: IP Profiles can also be implemented when using a Proxy server (when the
AlwaysUseRouteTable parameter is set to 1).
The following procedure describes how to configure IP Profiles through the Web interface.
You can also configure it through ini file (IPProfile) or CLI (configure voip > coders-and-
profiles ip-profile).
To configure an IP Profile:
1. Open the IP Profiles table (Setup menu > Signaling & Media tab > Coders &
Profiles folder > IP Profiles).
2. Click New; the following dialog box appears:
Figure 20-7: IP Profiles Table - Add Dialog Box
3. Configure an IP Profile according to the parameters described in the table below.
4. Click Apply.
Table 20-5: IP Profiles Table Parameter Descriptions
Parameter Description
General
Index
[IpProfile_Index]
Defines an index number for the new table row.
Note: Each row must be configured with a unique index.
Name
profile-name
Defines a descriptive name, which is used when associating the row
in other tables.
To Next Page
Loading...
