User's Manual 492 Document #: LTRT-10532
Mediant 500L Gateway & E-SBC
On the top of the page, a bar with Trunk number icons displays the status of each
trunk according to the following color codes:
• Grey: Disabled
• Green: Active
• Yellow: RAI alarm (also appears when you deactivate a Trunk by clicking the
Deactivate button)
• Red: LOS/LOF alarm
• Blue: AIS alarm
• Orange: D-channel alarm (ISDN only)
2. Select the trunk that you want to configure, by clicking the desired Trunk number icon.
The bar initially displays the first eight trunk number icons (i.e., trunks 1 through 8). To
scroll through the trunk number icons (i.e., view the next/last or previous/first group of
eight trunks), see the figure below:
Figure 22-1: Trunk Scroll Bar (Used Only as an Example)
Note: If the Trunk scroll bar displays all available trunks, the scroll bar buttons are
unavailable.
After you have selected a trunk, the following is displayed:
• The read-only 'Module ID' field displays the module number to which the trunk
belongs.
• The read-only 'Trunk ID' field displays the selected trunk number.
• The read-only 'Trunk Configuration State' displays the status of the trunk:
♦ "Not Configured": Trunk is not configured.
To Next Page
Loading...
