AudioCodes Mediant 500L - Page 602

User's Manual 602 Document #: LTRT-10532
Mediant 500L Gateway & E-SBC
Parameter Description
eNumber]

Validation of source (calling) number for Tel-to-IP calls
 Mapping between local and global (E.164) numbers between Tel
and IP sides respectively
Module
module
[ISDNSuppServ_Module]
Defines the device's module number to which the endpoint is
connected.
Port
port
[ISDNSuppServ_Port]
Defines the port number on the module to which the endpoint is
connected.
User ID
user-id
[ISDNSuppServ_UserId]
Defines the User ID for registering the endpoint to a third-party
softswitch for authentication and/or billing.
User Password
user-password
[ISDNSuppServ_UserPassw
ord]
Defines the user password for registering the endpoint to a third-party
softswitch for authentication and/or billing.
Note: For security, the password is displayed as an asterisk (*).
CFB Phone Number
cfb-to_phone-number
[ISDNSuppServ_CFB2Phon
eNumber]
Defines the phone number for BRI Call Forward Busy (CFB) services.
If the BRI extension is currently in use, the device forwards the call to
this number.
Note:
 The parameter is applicable only to BRI interfaces.
 To enable BRI call forwarding services, see the
BRICallForwardHandling parameter.
 For more information on configuring local handling of BRI call
forwarding, see Local Handling of BRI Call Forwarding on page
579.
CFNR Phone Number
cfnr-to_phone-number
[ISDNSuppServ_CFNR2Pho
neNumber]
Defines the phone number for BRI Call Forward No Reply (CFNR)
services. If the BRI extension does not answer the call within a user-
defined timeout (see the 'No Reply
Time' parameter below), the device
forwards the call to this number.
Note:
 The parameter is applicable only to BRI interfaces.
 To enable BRI call forwarding services, see the
BRICallForwardHandling parameter.
 For more information on configuring local handling of BRI call
forwarding, see Local Handling of BRI Call Forwarding on page
579.
CFU Phone Number
cfu-to_phone-number
[ISDNSuppServ_CFU2Phon
eNumber]
Defines the phone number for BRI Call Forward Unconditional (CFU)
services. The device always forwards the call to this number.
Note:
 The parameter is applicable only to BRI interfaces.
 To enable BRI call forwarding services, see the
BRICallForwardHandling parameter.
 For more information on configuring local handling of BRI call
forwarding, see Local Handling of BRI Call Forwarding on page
579.
No Reply Time Defines the timeout (in seconds) that if the BRI extension does not