AudioCodes Mediant 500L - Page 872

User's Manual 872 Document #: LTRT-10532
Mediant 500L Gateway & E-SBC
Table 52-1: Description of Graphical Display of Device
Item # Description
1 Displays the highest severity of an active alarm raised (if any) by the device:
 Green = No alarms
 Red = Critical alarm
 Orange = Major alarm
 Yellow = Minor alarm
To view active alarms, click the Alarms area to open the Active Alarms page (see
Viewing Active Alarms on page 879).
2 STATUS LED displaying the operating status.
3 USB ports for USB storage services.
4 RS-232 interface port (RJ-45).
5 Module number of LAN or telephony interfaces
6 Ethernet LAN module with port status icons:
 (green): Link is working
 (gray): Link is not configured
 (red): Link error
To view detailed port information, click the port icon (see Viewing Ethernet Port
Information on page 907).
7 Module name.
8 BRI port (trunk or channel) status icon.
Icon Trunk Description (Digital
Module)
Channel Description
(Analog Modules)
(gray)
Disable: Trunk not configured
(not in use)
 FXS (one of the following):

The port is physically
connected to an FXS
analog device (e.g.,
telephone), which
is in idle
state (i.e., on-hook
position).

The port is not physically
connected.
 FXO: The port is physically
connected to an FXO analog
device (e.g., PBX), which is in
idle state (i.e., on-hook
position).
(green)
Active - OK: Trunk synchronized FXS/FXO: The port is physically
connected to an analog device,
which is in off-hook state with an
established call (i.e., active RTP
stream).
(yellow)
RAI Alarm: Remote Alarm
Indication (RAI), also known as
the Yellow Alarm
-