User's Manual 898 Document #: LTRT-10532
Mediant 500L Gateway & E-SBC
To view Proxy Set status:
Open the Active Proxy Set Status page (Monitor menu > Monitor tab > VoIP Status
folder > Proxy Sets Status).
Figure 56-3: Viewing Proxy Sets Status
Table 56-3: Proxy Sets Status Table Description
Parameter Description
Proxy Set ID
Displays the Proxy Set ID.
Mode
Displays the Proxy Sets' operational mode:
"Parking" or "Homing": Redundancy mode, as configured by the
ProxySet_ProxyRedundancyMode parameter.
"Load Balancing: Proxy load balancing mode, as configured by
the ProxySet_ProxyRedundancyMode parameter.
For more information, see Configuring Proxy Sets.
Keep Alive
Displays whether the Proxy Keep-Alive feature is enabled ("Enabled")
or disabled ("Disabled"), as configured by the
ProxySet_EnableProxyKeepAlive parameter (see Configuring Proxy
Sets).
Address
Displays the IP address of the proxy server. This can be the IP
address as configured in dotted-decimal notation for the Proxy Set, or
the resolved IP address of a DNS query if an FQDN is configured for
the Proxy Set. IP addresses resolved from FQDNs are displayed as
"<FQDN name>(<resolved IP address>)", for example,
"abc.com(10.8.6.80)". The IP address that is currently used for routing
is indicated with an asterisk, for example, "10.8.6.89(*)".
If the FQDN failed to be resolved, only the FQDN name is displayed
(e.g., "abc.com").
Priority
Displays the priority of IP addresses resolved from FQDNs.
Note: The field is applicable only to Proxy Sets configured with
FQDNs.
Weight
Displays the weight of IP addresses resolved from FQDNs.
Note: The field is applicable only to Proxy Sets configured with
FQDNs.
Success Count
Displays the total number of successful keep-alive messages (by SIP
OPTIONS) sent by the device to the proxy.
To Next Page
Loading...
