Version 7.2 91 Mediant 500L Gateway & E-SBC
User's Manual 7. CLI-Based Management
d. Under the 'Key' group, select the displayed encoded text (pubic key) between
"ssh-rsa" and "rsa-key-….", as shown in the example below:
Figure 7-1: Selecting Public RSA Key in PuTTY
2. You can use the public key per management user or for all management users:
• Per user: Open the Local Users table (see Configuring Management User
Accounts on page 73), and then for the required user, paste the public key that
you copied in Step 1.d into the 'SSH Public Key' field, as shown below:
Figure 7-2: Pasting Public RSA Key per User in Local Users Table
To Next Page
Loading...
