AudioCodes Mediant 500L - Page 916

User's Manual 916 Document #: LTRT-10532
Mediant 500L Gateway & E-SBC
CDR Field Description CDR Report Type
(SBCReportType)
Format
characters)
LegId
Unique ID number of the call leg within a
specific call session.
A basic call consists of two legs
(incoming leg and outgoing leg) and
thus, two leg IDs are generated for the
session, one for each leg.
For each new call, the device assigns
leg ID "1" to the first leg. The device then
increments the leg ID for subsequent
legs according to the leg sequence in
the call session. For example, the device
generates leg ID "1" for the incoming leg
and leg ID "2" for the outgoing leg. If the
call is transferred, the device generates
leg ID "3" for the leg belonging to the call
transfer target. Another example is a call
forking session where the leg ID
sequence may be as follows: incoming
leg is "1", outgoing leg to user's office
phone is "2" and outgoing leg to the
user's mobile phone is "3". If the call is
then transferred, the leg ID for the
transfer leg is "4".
"CALL_START",
"CALL_CONNECT"
and "CALL_END"
String
(decimal)
Orig
Call originator:
 "LCL": local
 "RMT": remote
All String
SourceIp
Source IP address All String (up to
20
characters)
SourcePort
Source UDP port All String (up to
10
characters)
DestIp
Destination IP address All String (up to
20
characters)
DestPort
Destination UDP port All String (up to
10
characters)
TransportType
Transport type:
 "UDP"
 "TCP"
 "TLS"
All String
SrcURI
Source URI All String (up to
41
characters)
SrcURIBeforeMap
Source URI before manipulation All
String (up to
41