Version 7.2 939 Mediant 500L Gateway & E-SBC
User's Manual 59. Reporting Information to External Party
Parameter Description
Field Type
col-type
[SBCCDRFormat_FieldType]
Defines the CDR field (column) that you want to customize. The
applicable CDR field depends on the settings of the 'CDR Type'
parameter:
For all types: [300] CDR Type (default); [301] Call ID; [302]
Session ID; [303] Report Type; [304] Media Type; [305]
Accounting Status Type; [306] H323 ID; [307] RADIUS Call ID;
[308] Blank; [309] Global Session ID; [310] Leg ID.
Syslog SBC, Local Storage SBC, and RADIUS SBC: [400]
Endpoint Type; [401] Call Orig; [402] Source IP; [403] Destination
IP; [404] Remote IP; [405] Source Port; [406] Dest Port; [407]
Remote Port; [408] Call Duration; [409] Termination Side; [410]
Termination Reason; [411] Setup Time; [412] Connect Time;
[413] Release Time; [414] Redirect Reason; [415] Was Call
Started; [416] IP Group ID; [417] IP Group Name; [418] SRD ID;
[419] SRD Name; [420] SIP Interface ID; [421] Transport Type;
[422] Signaling IP DiffServ; [423] Termination Reason Category;
[424] Proxy Set ID; [425] IP Profile ID; [426] IP Profile Name;
[427] Media Realm ID; [428] Media Realm Name; [429] SIP
Termination Reason; [430] SIP Termination Description; [431]
Caller Display ID; [432] Callee Display ID; [433] SIP Interface
Name; [434] Call Orig RADIUS; [435] Termination Side RADIUS;
[436] Termination Side Yes No; [437] Termination Reason Value;
[438] Proxy Set Name; [439] Trigger.
Syslog Media and RADIUS SBC:
[600] Channel ID; [601] Coder
Type; [602] Packet Interval; [603] Payload Type; [604] Local
Input Packets; [605] Local Output Packets; [606] Local Input
Octets; [607] Local Output Octets; [608] Local Packet Loss; [609]
Local Round Trip Delay; [610] Local Jitter; [611] Local SSRC
Sender; [612] Remote Input Packets; [613] Remote Output
Packets; [614] Remote Input Octets; [615] Remote Output
Octets; [616] Remote Packet Loss; [617] Remote Round Trip
Delay; [618] Remote Jitter; [619] Remote SSRC Sender; [620]
Local RTP IP; [621] Local RTP Port; [622] Remote RTP IP; [623]
Remote RTP Port; [624] RTP IP DiffServ; [625] Local R Factor;
[626] Remote R Factor; [627] Local MOS CQ; [628] Remote
MOS CQ; [629] AMD Decision; [630] AMD Decision Probability;
[631] Latched RTP IP; [632] Latched RTP Port; [633] Latched
T38 IP; [634] Latched T38 Port.
Syslog SBC, Local Storage SBC, and RADIUS SBC: [800]
Source URI; [801] Destination URI; [802] Source URI Before
Manipulation; [803] Destination URI Before Manipulation; [804]
Redirect URI; [805] Redirect URI Before Manipulation; [806] SIP
Method; [807] Direct Media; [808] Source Username; [809]
Destination Username; [810] Source Username Before
Manipulation; [811] Destination Username Before Manipulation;
[812] Source Host; [813] Destination Host; [814] Source Host
Before Manipulation; [815] Destination Host Before Manipulation;
[816] Source Dial Plan Tags; [817] Destination Dial Plan Tags;
[818] Remote SIP User Agent.
Title
title
[SBCCDRFormat_Title]
Defines a new name for the CDR field (for Syslog or local storage)
or for the RADIUS Attribute prefix name (for RADIUS accounting)
that you selected in the 'Column Type' parameter.
To Next Page
Loading...
