AudioCodes MediaPack MP-124

Version 6.2 477 February 2011
SIP User's Manual 10. Configuration Parameters Reference
Parameter Description
Web: Use Routing Table for Host
Names and Profiles
EMS: Use Routing Table For Host
Names
[AlwaysUseRouteTable]
Determines whether to use the device's routing table to obtain
the URI host name and optionally, an IP profile (per call) even if
a Proxy server is used.
 [0] Disable = Don't use internal routing table (default).
 [1] Enable = Use the 'Tel to IP Routing'.
Notes:
 This parameter appears only if the 'Use Default Proxy'
parameter is enabled.
 The domain name is used instead of a Proxy name or IP
address in the INVITE SIP URI.
Web/EMS: Tel to IP Routing Mode
[RouteModeTel2IP]
For a description of this parameter, see ''Configuring Tel to IP
Routing'' on page 138.
Web: Tel to IP Routing
EMS: SIP Routing > Tel to IP
[Prefix]
This ini file table parameter configures the 'Tel to IP Routing' for
routing Tel-to-IP calls. The format of this parameter is as follows:
[PREFIX]
FORMAT PREFIX_Index = PREFIX_DestinationPrefix,
PREFIX_DestAddress, PREFIX_SourcePrefix,
PREFIX_ProfileId, PREFIX_MeteringCode, PREFIX_DestPort,
PREFIX_SrcIPGroupID, PREFIX_DestHostPrefix,
PREFIX_DestIPGroupID, PREFIX_SrcHostPrefix,
PREFIX_TransportType, PREFIX_SrcTrunkGroupID,
PREFIX_DestSRD;
[\PREFIX]
For example:
PREFIX 0 = *, domain.com, *, 0, 255, $$, -1, , 1, , -1, -1, -1;
PREFIX 1 = 20, 10.33.37.77, *, 0, 255, $$, -1, , 2, , 0, -1;
Notes:
 This parameter can include up to 50 indices.
 The following parameters are not applicable:
PREFIX_SrcIPGroupID, PREFIX_DestHostPrefix,
PREFIX_SrcHostPrefix, PREFIX_DestSRD.
 For a detailed description of the table's parameters and for
configuring this table using the Web interface, see
''Configuring Tel to IP Routing'' on page 138.
 For a description on using ini file table parameters, see
''Configuring ini File Table Parameters'' on page 194.