Avaya PARTNER Advanced Communications System - Page 120

PARTNER
®
Advanced Communications System Installation, Programming, and Use
Dialing Restrictions and Permissions
4-22
■ The entries you must make to permit or restrict toll calls differ depending on the setting for Toll
Call Prefix (#402).
■ If Star Code Dial Delay (#410) is active, after a valid star code is dialed, the system resets the
dialing restrictions to check the number beginning with the first digit after the star code.
■ If you want to go to another programming procedure when entering telephone numbers in a
list, you must press
N + P, since entering # and a three-digit code is
considered part of the telephone number.
Programming 4
To create a list of Disallowed Phone Numbers:
1. Press
f00ss#404 at extension 10 or 11.
2. At the
List Number: prompt, enter a list number (1–8).
3. At the Entry: prompt, select a list entry (01–10).
4. At the Data
- - - - - - - - - - - - prompt, enter the first telephone number.
5. To save the telephone number in memory, press
e.
6. Do one of the following:
■ To add other telephone numbers to this list, press n to select a different list entry
and repeat Steps 4 and 5.
■ To change the telephone number you just entered, press r and repeat Steps 4
and 5.
■ To delete the telephone number you just entered, press r.
■ To create another list, press N + P and repeat from Step 2.
7. Select another procedure, or exit programming mode.