Avaya PARTNER Advanced Communications System - Using Group Calling-Ring;Page on a Single-Line Telephone

Programming & Using Telephone Features
Group Calling—Ring/Page (I7G/I*7G)
8-41
To manually ring or page a Calling Group:
1. Lift the handset and press
i.
You hear intercom dial tone.
2. Do one of the following:
■ To make a ringing call, dial 7 and a group number (1–4).
All available extensions in the Calling Group ring.
■ To make a paging call, press *7 and a group number (1–4). After the beep, start talking.
Your voice is heard through the speakers of all system telephones that are not busy in the
Calling Group. If someone answers the page, you are connected to that person and the
rest of the Calling Group no longer hears the page.
To manually transfer a call to a Calling Group:
1. While on a call, press
&.
2. Dial
7 and a group number (1–4). You can hang up or stay on the line to announce the call.
All available extensions in the Calling Group ring.
Using Group Calling—Ring/Page on a Single-Line
Telephone 8
To ring or page a Calling Group:
1. Lift the handset.
You hear intercom dial tone.
2. Do one of the following:
■ To make a ringing call, dial 7 and a group number (1–4).
All available extensions in the Calling Group ring.
■ To make a paging call, press *7 and a group number (1–4). After the beep, start talking.
Your voice is heard through the speakers of all system telephones that are not busy in the
Calling Group. If someone answers the page, you are connected to that person and the
rest of the Calling Group no longer hears the page.
To transfer a call to a Calling Group:
1. While on a call, press the switchhook down once rapidly.
You hear intercom dial tone.
2. Dial
7 and a group number (1–4). You can hang up or stay on the line to announce the call.
All available extensions in the Calling Group ring.